Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 72)

WaveRunner Xi-A and MXi-A Oscilloscopes
64 922138-00 Rev A
Save and Recall
Saving and Recalling Oscilloscope Settings
You can save or recall settings to or from hard disk, floppy disk, or LAN
locations.
Saving Oscilloscope Settings
Touch File  Save Setup… on the menu bar.
Or, press the Save/Recall front panel button,
and then touch the Save Setup tab.
Save To File by touching inside the Save
panel to file field and providing the path to
the destination folder. Or, by touching
Browse, navigating to the destination folder,
and then choosing Save Now.
Save Internal Setups on the oscilloscope's
hard drive by touching inside a SetupX field
and using the pop-up keyboard to provide a
file name. After touching the Save button,
the file is put in D:\Internal Setups, and the
current date is displayed above the field.