Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 66)

WaveRunner Xi-A and MXi-A Oscilloscopes
58 922138-00 Rev A
Persistence Trace Range
This math operation has a field where you can enter the percent of the
persistence trace population to use in creating a new waveform.
Persistence Sigma
This math operation has a field where you can enter a scale, measured in
standard deviations, by which to create a new waveform.
Display Formats
Display Setup
Touch Display  Display Setup on the menu bar.
Touch one of the Grid combination buttons. Auto
automatically adds or deletes grids as you select
more or fewer waveforms to display.
Touch inside the grid Intensity field and enter a value
from 0 to 100 using the pop-up keypad.
Touch the Grid on top checkbox if you want to
superimpose the grid over the waveform. Depending
on the grid intensity, some of your waveform may be
hidden from view when the grid is placed on top.
Undo by un-checking the Grid on top checkbox.
Touch the Axis labels checkbox to permanently
display the values of the top and bottom grid lines
(calculated from volts/div) and the extreme left and
right grid lines (calculated from the timebase).
Choose a line style for your trace: solid Line or
Points. You can also set the Intensity percentage of
your trace.