IAI America SSPDACR User Manual
Page 95
14. Motor Replacement Procedures
87
Rear cover
Cable mounting
cover
(8) Installing the rear cover
[1] Insert the cable affixing cover into the rear cover.
[2] Tighten the four bolts to install the rear cover using an Allen wrench of 2.5 mm across flats for ISDB, ISPDB,
ISDBCR and ISPDBCR-S, or 3 mm across flats for all other models.
[3] Tighten the screws with an Allen wrench of 2 mm across flats to attach the screws for the cable mounting
cover.
Rear cover
Cable mounting cover
Rear cover
Cable mounting cover