IAI America SSPDACR - Manual (Page 33)

5. T
ransport
25
5. Transport
5.1 Handling a Single Axis
5.1.1 Handling a Package
Unless otherwise specified, each axis is packed and shipped individually.
x Do not bump or drop the package. The package is not specially designed to withstand the impact of dropping
or bumping.
x An operator must not attempt to carry a heavy package alone. Transport the package using an appropriate
transport means.
x If the shipping box is to be left standing or transported, it should be in a horizontal position. If the packing
specification is instructed, follow the instruction.
x Do not step onto the package.
x Do not put any article on the package which may deform or damage the package.
5.1.2 Handling an Actuator after Unpacking
(1) ISDB, ISPDB, ISDBCR, ISPDBCR
x Do not transport the actuator by holding the cable or move it by pulling the cable.
x When transporting the actuator, hold its base.
x When transporting the actuator, be careful not to bump the actuator against anything.
x Do not apply excessive force on any part of the actuator.
x In the case of the high-precision straightness specification type, be careful not to make a damage and the
traces of hitting at the base bottom.
There is a possibility that the running accuracy changes.