IAI America SSPDACR - Manual (Page 55)

9. Setting the Home Position
47
9.4 How to Use the Homing Mark Stickers
The following stickers are supplied with the actuator. Use these stickers, as necessary, to mark the home position
of the actuator, etc.
Examples of use
[1] For marking the home position of the actuator
Attach two stickers when the actuator is stopped at its home.
[2] As positioning marks
These marks can be used to check for position deviation, etc.
Sticker details
x 1 sheet
Homing mark stickers
Graduation mark sticker x 4
(The graduations are provided for 10 mm at a 1-mm pitch.)
Attach to the slider.
Attach to the base.
Attach on the home side of the base.
Motor
Mark sticker x 4
• Remove each sticker from the backing paper when use.
Notes 1. The back side is adhesive.
2. Remove dirt and oil from the attaching surface beforehand.
3. Avoid attaching the stickers over the caution labels.
Attach to the slider.
Attach to the slider.
Motor
Attach at desired moving positions.