IAI America SSPDACR - Manual (Page 42)

6. Installation
34
[Threaded hole]
Tightening torque
Installation bolt
Bolt seating surface is steel Bolt seating surface is aluminum
M6 12.3 Nxm 5.4 Nxm
M8 30.0 Nxm 11.5 Nxm
[When threaded holes are used]
Seating surface Seating surface
Bolt
Warning: The threaded holes are not through, so exercise caution when selecting the bolt length. Use of
inappropriate bolts may damage the threaded holes or result in insufficient mounting strength of the
actuator, leading to a lower precision or unexpected accident.