IAI America SSPDACR - Manual (Page 29)

2. Specification
21
L
L
Mb or Mc direction
Direction of moment
Direction of allowable overhang
Ma direction
Mb direction
Mc direction
Ma direction
Size [mm]
Reference position for
moment calculation
Reference position
2.5 Allowable Load Moment of the Actuator
(1) ISDB, ISPDB, ISDBCR, ISPDBCR
Allowable load moment (Nxm) Allowable load moment (Nxm)
Size
Ma Ma Mb Mc Mb Mc
Allowable overhang load (L)
S 143.8 205.4 336.0 28.4 40.2 65.7
Ma direction: 450
Mb or Mc direction: 450
M 341.5 487.0 796.5 69.6 99.0 161.7
Ma direction: 600
Mb or Mc direction: 600
MX 341.5 487.0 796.5 69.6 99.0 161.7
Ma direction: 600
Mb or Mc direction: 600
L 560.2 800.1 1325.3 104.9 149.9 248.9
Ma direction: 750
Mb or Mc direction: 750
LX 560.2 800.1 1325.3 104.9 149.9 248.9
Ma direction: 750
Mb or Mc direction: 750
Caution: Make sure the load installed on the actuator is not longer than the allowable overhang load length
(L). If the load is longer than L, vibration may occur or the settling time may increase depending on
the position of center of gravity position or weight of the work part.
If a load moment exceeding the allowable load moment is applied, not only the life of the guide will
become shorter but vibration or longer settling time may also result.
S 42.5
M 51.5
MX 51.5
L 61.5
LX 61.5
L mm
L [mm]