IAI America SSPDACR - Manual (Page 44)

6. Installation
36
z SSPDACR
Slider reference surface (side)
Right side as viewed from the motor
Slider reference surface (top)
Reference surface (side)
Right side as viewed from the motor
Reference surface (bottom)
Motor side
View from the upper side
Quasi-reference surface Reference surface
Quasi-reference surface
x If the base reference surface (side) is used, provide a stopper part of the dimension shown below.
Shoulder dimension on base/slider reference surface (side)
Size Reference surface A
Slider reference surface (side) 1.5 to 3.5
S
Base reference surface (side) 3 to 5
Slider reference surface (side) 1.5 to 3.5
M
Base reference surface (side) 3 to 7.5
Slider reference surface (side) 1.5 to 3.5
L
Base reference surface (side) 3 to 8