IAI America SSPDACR User Manual
Page 34
5. T
ransport
26
(2) SSPDACR
x
Four eye bolts are installed, so use these bolts to transport the actuator. The SSPDACR, when unpacked,
looks like the condition shown in the figure below.
x
Do not hold the motor cover when transporting the SSPDACR. Doing so may damage the cover due to the
weight of the actuator or the main unit may fall.
x
Do not transport the actuator by holding the cable, or move it by pulling the cable.
x
Be careful not to bump the actuator against anything when transporting it.
x
Do not apply excessive force on any of the actuator parts.
x
In the case of the high-precision straightness specification type, be careful not to make a damage and the
traces of hitting at the base bottom.
There is a possibility that the running accuracy changes.
Motor cover
M8 eye bolt