IAI America SSPDACR - Manual (Page 59)

9. Setting the Home Position
51
9.5.2 ECON and SCON Controllers
(1) Open the position edit screen.
On the PC software screen, click , select a desired position number, and then click OK to display the
following screen.
Click the home return button to perform home return.
(2) Turn off the servo and move the slider to the home position by hand.
If the slider cannot be moved by hand, move the slider in the jog or inching mode.
Check the current value being displayed, and record the position deviation.
Click this button to open the position edit screen.
Home return button
The current value is displayed.