Fairbanks FB2550 SERIES - Manual (Page 95)

Section 5: Input/ Output
07/2012 95 51254 Rev. 3
5.8.3. METHOD 1 – PRE-CONFIGURED OUTPUT,
CONTINUED
14. Touch the data field to the right of the
Baud legend and a list of items will
appear from which a selection is
made.
15. Select the required BAUD rate from
the menu list.
16. Touch the data field to the right of the
Parity legend and a list of items will
appear from which a selection is
made.
Select the required PARITY rate
from the menu list.
17. Touch the data field to the right of the
Data Bits legend and a list of items
will appear from which a selection is
made.
18. Select the required DATA BIT from
the menu list.
19. Touch the data field to the right of
the Stop Bits legend and a list of
items will appear from which a
selection is made.
20. Select the required STOP BIT from
the menu list.