Fairbanks FB2550 SERIES - Manual (Page 82)

Section 5: Input/ Output
07/2012 82 51254 Rev. 3
5.5. FORMAT TICKETS, CONTINUED
• Top / Left: Plots the x-y coordinates of
where the fields are located.
– Top field moves the data field in an
up and down position.
▪ This value is incremented in tenths (0.1)
of an inch.
– Left field moves the data field in a
left to right direction.
▪ This value is incremented in tenths (0.1)
of an inch.
• Height / Width: These two fields establish the font size of the data which has
been selected. Care should be taken when changing these data fields. The
characters can be distorted if the ratios of the default settings are not maintained.
Default – H eight / Width: 0.1 0.6 change to
Height / Width: 1.1 1.6.
• Enhanced: Touch the data entry box on the screen to the right of Enhanced:
and select Yes or No to enable or disable the emphasized print.
• Printed: Touch the data entry box on the screen to the right of Printed: and
select Yes or No to enable or disable the printing of the data item.
1. Press the SAVE CHANGES button when any changes are made
otherwise the changes will be lost.
•
Selecting BACK: FORMAT TICKET returns to the Format Ticket.