Fairbanks FB2550 SERIES - Manual (Page 174)

07/2012 174 51254 Rev. 3
Appendix II: Data Output
A. REMOTE DISPLAY OUTPUT
Data Format
<4><0>
Note(s):
1. Characters denoted by X are characters 0-9.
2. Leading zeroes are suppressed.
3. Polarity indication for a positive value is a space (
SP ).
−−−−
Negative values are not transmitted.
4. Identifier code <4><0> = Gross weight .
−−−−
Transmission is Gross Only.
5. Transmission for the DEMAND Mode occurs when a carriage return (CR) Hex
0D is received.
B. CONFIGURE OUTPUT
FAIRBANKS DATA FORMAT
Note(s):
1. Characters denoted by G and T are characters 0-9.
2. Leading zeroes are suppressed.
3. Gross Weight Data =
G
Tare Weight Data = T
Status Code (Word) A
Bit # X00 X0 X X.X X.XX X.XXX X.XXXX X.XXXXX
0 0 1 0 1 0 1 0 1
1 0 0 1 1 0 0 1 1
2 0 0 0 0 1 1 1 1