Fairbanks FB2550 SERIES - Manual (Page 19)

Section 3: Operations
07/2012 19 51254 Rev. 3
3.4.1. BASIC OPERATIONS SUMMARY, CONTINUED
INBOUND/OUTBOUND WEIGHING
The INBOUND/OUTBOUND Mode follows
these steps.
1. With the indicator powered up, press
the ZERO key.
2. Drive the vehicle onto the platform,
whether it is
either full or empty.
3. Press the INBOUND key.
– The Indicator displays the LOOP ID
NUMBER on the screen, then also prints
it on the Transaction Ticket .
4. Drive off the scale and process the
trailer, by either filling up or emptying
it.
5. The same vehicle returns to the scale,
either full or empty.
6. Press the OUTBOUND button.
7a. If it is known, enter the LOOP ID Number with the keypad, then press
ENTER .
OR
7b. If the Loop ID Number is not known, press the F3 key to open the full
INBOUND LIST.
– The Inbound, Outbound and the Tare weighment amounts together make a
COMPLETE TRANSACTION . Weighment of the empty vehicle is the
STORED TARE . An Inbound Weighment without an Outboud Weighment
is an INCOMPLETE TRANSACTION .
– The list of Incomplete Transactions displays.
7. Select the correct LOOP ID number.