Fairbanks FB2550 SERIES - Manual (Page 125)

Section 10: Traffic Light Control
07/2012 125 51254 Rev. 3
6.1. TRAFFIC LIGHT CONTROL, CONTINUED
11. Select the LOOP DETECTOR
Control button.
– Sensor contact plates alert that the vehicle
has entered the scale, and also that it is
leaving.
12. Select the correct Loop Detector.
– Extra LOOP choices (i.e. 3- Loop, 4-Loop)
appear when the optional Digital Relay
Card (
30920 ) is added to the Instrument.
13. Select the ZERO ON APPROACH
Control button.
– Only when the scale is on ZERO (0) with
the light change to green and let the driver
advance.
14. Choose NO or YES .
15. Select the INHIBIT IF ACTIVE
Control button.
16a. Selecting YES will NOT allow a weighment
to be processed if a loop detector is “active”.
– This ensures that a truck is fully scale-
borne before a weight can be processed.
Trucks which are in succession cannot
stop on the top of the loops, or the
weighment transaction will discontinue.
OR
16b. Select NO to allow a transactions to be processed, even if a the vehicle is still
detected at the loop.
17. Select the COMPLETE CYCLE Control button.
– Only when the entire weighment process is complete, and the ticket is
available for the driver, will the light change to green, letting the vehicle
advance.
18. Choose NO or YES .
19. Press the SAVE CHANGES button when any changes are made, or
they will be lost.