Fairbanks FB2550 SERIES - Manual (Page 12)

Section 2: Getting Started
07/2012 12 51254 Rev. 3
2.3. SAFETY
Follow these safety precautions during operation:
Properly shut down the equipment and
remove power before any cables or
hardware is disconnected.
Unplug the power cord to the equipment
after a proper shut down before servicing
the equipment.
2.4. USERS’ RESPONSIBILITIES
All electronic and mechanical calibrations and/or adjustments required for
making this equipment perform to accuracy and operational specifications
should be performed by trained service personnel.
Absolutely no physical, electrical or program modifications other than selection
of standard options and accessories are to be made to this equipment.
─ Electrical connections other than those specified may not be
performed, and physical alterations (holes, etc.) are not allowed.
The equipment consists of printed circuit assemblies which must be handled
using ESD handling procedures, and must be replaced as units.
─ Replacement of individual components is not allowed.