Fairbanks FB2550 SERIES - Manual (Page 171)

Section 9 Network Application Configuration
07/2012 171 51254 Rev. 3
E. STATUS/COMMAND WORD BIT USAGE, CONTINUED
KG WEIGHT UNITS WORD 0 BIT 9
Command: Switch scale to kg units.
Status: Scale is indicating in kg units.
TON WEIGHT UNITS WORD 0 BIT 10
Command: Switch scale to ton units.
Status: Scale is indicating in ton units.
TONNE WEIGHT UNITS WORD 0 BIT 11
Command: Switch scale to tonne units.
Status: Scale is indicating in tonne units.
DECIMAL LOCATION WORD 1 BITS 0,1,2
Command: Used in integer to float weight conversions.
Status: Indicates location of decimal point in weight data.
LOAD TARE WORD 1 BIT 3
Command: Load tare from tare memory address.
Status: Switches to 1 after command is executed and returns to 0 when
command is cleared.
AUTO TARE WORD 1 BIT 4
Command: Take current scale gross weight as tare value.
Status: Switches to 1 after command is executed and returns to 0 when
command is cleared.
LOAD SETPOINT 1 WORD 1 BIT 5
Command: Load setpoint 1 for this scale.
Status: Switches to 1 when command is executed returns to zero when
command is cleared.