Fairbanks FB2550 SERIES - Manual (Page 158)

Section 9 Network Application Configuration
07/2012 158 51254 Rev. 3
9.3.2. SYNCHRONIZING THIS TERMINAL, CONTINUED
The tables below will be populated in the Remote Terminal with data from the other
selected Terminal.
– Customers – Products
– Tares – Product Groups
– Product Groups Products
•
After this process, complete and incomplete transactions are instantly shared with
all Terminals on the Network.
•
Calibration cannot be performed from a remote location. It must be performed at
the Terminal to which the scale is physically connected.
– This is also true for viewing cell diagnostics, peak weights, and cell errors.
•
Traffic Light Controls cannot be configured from a remote location, but only at the
Terminal to which they are physically connected.