Fairbanks FB2550 SERIES - Manual (Page 26)

Section 3: Operations
07/2012 26 51254 Rev. 3
3.6.4. LOAD CELL DIAGNOSTICS
Instruments equipped with Intalogix
®
technology have load cell diagnostics
features for easier troubleshooting
capabilities.
1. To view the diagnostic information,
select the correct scale.
•
Select BACK: OPERATOR MENU to
return to the Operator Menu.
A. Scale ID x Diagnostics
The diagnostic screen gives a quick snapshot
of how each load cell is performing.
– CELL: Identifies the load cell in the
scale platform.
– STATUS: Compares the load cell
output to stored calibration values and
posts a GOOD or BAD condition.
– COUNTS: Displays the load cell’s
current counts.
– GHOST: Ability to electronically “mimic” or duplicate a load cell if equipped
with an Intalogix
™
Interface for load cell communications (preventing system
failure and/or shutdown).
– FLAG: Visual flags “ * ” are used to identify problem load cell(s) on diagnostic
screen until flag is manually cleared This improves the ability to identify
intermittent issues.
•
Select BACK: CELL DIAGNOSTICS to return to the Cell Diagnostics
Menu.