Fairbanks FB2550 SERIES - Manual (Page 154)

Section 9 Network Application Configuration
07/2012 154 51254 Rev. 3
9.2. STANDARD NETWORK SETUP, CONTINUED
Each Terminal can view weights and process transactions from any scale on the
network, as well as traffic light control. Transactions can be connected locally to a
printer.
– A re-direct option in each Terminal is available to cause a print to occur to a
specific remote Terminal on the network.
– Transaction information is shared by each Terminal on the network. Both
incomplete and complete transactions are instantly shared with all Terminals
on the network.
– Data entered into the database of a Terminal may be imported by a different
Terminal on the network.
••••
Customers
••••
Products
••••
Tares
••••
Product Groups
••••
Product Group Products
9.2.1. RECORD KEEPING
Fairbanks Scales strongly recommends to make a record of the set-up of the
Network.
– This prevents configuration errors as each terminal is set up and programmed.
– Keeping thorough records also helps later, when other technicians service the
site.
Displayed below is an example of a terminal set-up record.