Fairbanks FB2550 SERIES - Manual (Page 156)

Section 9 Network Application Configuration
07/2012 156 51254 Rev. 3
9.3. NETWORK SETUP PROCEDURE
9.3.1. NETWORK TERMINAL NAME
Follow these steps to setup the Network Name.
6. From the Weigh Screen, select
Menu.
7. Select Login and enter the
Password.
8. Select the CONFIGURATION
MENU .
9. Page Forward twice.
10. Select NETWORK
PARAMETERS.
11. Input a NETWORK NAME from
the list below.
– TERMINAL1 – TERMINAL4
– TERMINAL2 – TERMINAL5
– TERMINAL3
IMPORTANT NOTE: USE ONLY THE NETWORK NAMES LISTED ABOVE,
and be certain that they are not duplicated.
12. Press the SAVE CHANGES button when any changes are made or
they will be lost.
13. Return to the Weigh Screen.
14. Shut down and restart the FB2550 Instrument.
– All setup changes will apply after the Instrument reboot.