Fairbanks FB2550 SERIES - Manual (Page 106)

Section 5: Input/ Output
07/2012 106 51254 Rev. 3
5.10. IP OUTPUT CONFIGURATION
The IP Output is available using the Ethernet connection of the FB2550.
– Follow these sections to configure the Communication Data String Protocol.
– The MODE: selection configures the Network (Continuous) or Network
(Auto).
– The final step of the IP Configuration is assigning the communication
parameters for the device on the Network.
1. Select LOGIN .
2. Enter the Supervisor Password
or Service Password.
3. Select the CONFIGURATION
MENU .
4. Press PAGE FORWARD once.
5. Select CONFIGURE
OUTPUTS .
6. Touch the screen to select IP
SETUP, which configures the
FB2550.