Fairbanks FB2550 SERIES - Manual (Page 84)

Section 5: Input/ Output
07/2012 84 51254 Rev. 3
5.7. REMOTE DISPLAY SETUP AND CONFIGURATION
The FB2550 Instrument has two modes of operation.
– CONTINUOUS DISPLAY
– DISPLAY ON PRINT .
The remote display output may be configured for a RS232 interface or a 20 mA
interface.
5.7.1. SERIAL 20mA CONFIGURATION (MULTI-
FUNCTION BOARD)
The following steps configure the FB2550 for
use with the serial 20 mA to a remote display.
1. Select LOGIN.
2. Enter the Supervisor Password or
Service Password.
3. Select the CONFIGURATION
MENU .
4. Press PAGE FORWARD .
5. Select REMOTE DISPLAY .
6. Leave the settings as shown in the
image to the right.