Fairbanks FB2550 SERIES - Manual (Page 130)

Section 10: Traffic Light Control
07/2012 130 51254 Rev. 3
6.3. BLIND COUNTER, CONTINUED
3. Click RECORD MODE button to
select how the data will be stored,
if at all.
– ALL SCALE ACTIVITY – Records
all the weighments.
– NO DATA STORED/TICKET
PRINTED
– Enters all weighment
information to the ticket, and not
stored.
4. Click the FILE OUTPUT button,
and then select YES or NO .
– Sends the weighment data to a
specific folder.
5. Click the COM PORT OUTPUT
button, then select YES or NO .
6. Answer YES to send the transaction through one of the Configured
Output serial ports.
– These must be configured for this purpose.
– Blind Counter Transaction data will begin with a BLIND COUNTER
legend for identification.
– The user must be monitoring or logging data from this output port to make this
feasible.
– Typically, the Date and Time stamps of these blind weighments is the needed
information.
7. Click the CLEAR COUNTS button to start over on the Blind Counter
amounts.