Fairbanks FB2550 SERIES - Manual (Page 68)

Section 5: Input/ Output
07/2012 68 51254 Rev. 3
5.4.2. HP P2055d LASERJET PRINTER SETTINGS,
CONTINUED
Control Panel Menus
Complete the following steps to gain access to the Control Panel Menus.
1. Press the OK button.
2. Press the DOWN ARROW or UP ARROW buttons to navigate.
3. Press the OK button to select an item.
4. Press the BACK button to return to the previous list.
MENU
ITEM
SUB-MENU
ITEM
SUB-MENU
ITEM
DESCRIPTION
Language Select the language for the Control-Panel
display messages and the Product Reports.
Quiet Mode ON
OFF
•
Enable/ Disable Quiet Mode.
•
When ON , the product prints at a slower
rate.
Default = OFF
Paper Setup Def. Paper Size Def. Paper
Size
Select the size for printing a job that does not
specify a size.
Def. Paper Type Def. Paper
Type
Select the media type for printing a job that
does not specify a type.
Tray X Paper Type
Paper size
Selects the default size and type for the tray
from the list of available sizes and types.
Paper Out Action Wait Forever
Override
Cancel
•
Select how the product reacts when a print
job requires a size or type that is not
available, or when a specified tray is
empty.
•
Select WAIT FOREVER to make the
product wait until the correct media is
loaded, and press
OK .
Default = WAIT FOREVER
•
Select OVERRIDE to print on a different
size or type after a specified time delay.
•
Select CANCEL to automatically cancel
the print job after a specified time delay.
•
If OVERRIDE or CANCEL is selected,
the Control Panel prompts for the number
of seconds to delay.
•
Press the UP ( ▲ ) DOWN ( ▼ ) arrows to
increase and decrease time amount.
•
Maximum time amount is 3600 seconds.
* X = 1, 2, or 3