Fairbanks FB2550 SERIES - Manual (Page 60)

Section 5: Input/ Output
07/2012 60 51254 Rev. 3
5.3. PRINTER SWITCH SETTINGS
ROLL TAPE
PRINTER
SW 1
ON
SW 2
ON
SW 3
ON
SWITCH SETTINGS
iDP3550 (SER) 2, 3, 4,
8
1, 2, 3,
5, 6
— 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
TICKET
PRINTER
SW 1
ON
SW 2
ON
SW 3
ON
SWITCH SETTINGS
ML420 (USB) — — — N/A
HP 2055d (USB) — — — N/A
iDP3550 (SER) 1, 2, 3,
5, 6
2, 3, 4,
8
— 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
TM-U590 (SER) 1, 3, 7 All OFF — 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
TM-U295 (SER) 1, 3 All OFF — 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
SP298 (SER) All OFF 3 1, 5 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
SP700 (SER) 1 thru 7 1 thru 6 1, 5 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
SP2000 (SER) All OFF 3 1, 5 2400 Baud, Even Parity, 7 Data and 2 Stop Bit.
SP2200 (SER) 2, 3, 8 All OFF All OFF 2400 Baud, No Parity, 7 Data and 2 Stop Bit.
TM-U230 (SER) All OFF 2, 5, 8 — 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
ML420 (SER) — — — 9600 Baud, No Parity, 8 Data and 1 Stop Bit.
— No switch bank present inside the printer.
FB2550 Desktop and NEMA 4X use Serial Cable ( 25932 ) for the.
•
Use USB Cable ( 29827C ), If it is needed
NOTE: The Fairbanks Scales standard default switch settings for all the printers is
9600 Baud, No Parity, 8 Bits, and 1 Stop Bit.