Fairbanks FB2550 SERIES - Manual (Page 136)

Section 7: Video Camera Programming
07/2012 136 51254 Rev. 3
7.3. VIDEO CAMERA PROGRAMMING
1. Open the CONFIGURATION
MENU.
2. Press PAGE FORWARD twice.
3. Select VIDEO CAMERA
INPUTS.
The FB2550 has two (2) IP video camera inputs.
– These can be stored with the Transaction Data
– They can be displayed on the FB2550’s weigh screen, Idle Screen: setting, in
various ways.
4. To activate this feature, select YES
to one or both of the CAMERA 1
or 2 ENABLED options.
5. Select the CAMERA 1 or 2
TYPE.
6. Enter the CAMERA 1 or 2 IP
address.
7. Press PAGE FORWARD .
8. Select either NONE, CAMERA 1,
CAMERA 2, or TOGGLE for
each of the button options listed
below.
– The video camera can toggle between the two cameras or display them
individually.