beautypg.com

Video camera setup, Installing the camera without factory defaults – Fairbanks FB2550 SERIES User Manual

Page 131

background image

07/2012

131

51254 Rev. 3

POWER CABLE

DATA IN

– Either Crossover to

COMPUTER,

OR Straight-thru Cable to

SWITCH.

DATA IN + POWER

Cable to

CAMERA.

Section 7: Video Camera Programming

7.1. VIDEO CAMERA SETUP

NECESSARY TOOLS

Laptop computer with rights to change the IP Address.

Ethernet Cable with either of the following:

Crossover cable direct to the pc and camera.

OR…

Straight-through cables, switch, pc and camera.

NOTE:

It is strongly advised to review all the elements of the Video Camera, and

fully study these instructions before altering this unit.

7.2. INSTALLING THE CAMERA WITHOUT FACTORY DEFAULTS

1. Plug in the

PoE

CABLE

(Power over Ethernet) into the Video Camera.

2. Plug in the

DATA CABLE

to the Power Supply, either from a computer

or local switch.

3. Connect the

POWER SUPPLY

.