Atec Agilent-16047A - Manual (Page 80)

75
DC (High resistance) Other Components
16117E Low Noise Test Leads
Terminal Connector: Triaxial (m)
Cable Length (approx.): 1 m (connector to connector)
Weight (approx.): 130 g
16117C Low Noise Test Leads
Terminal Connector:
* Interlock connector enables and disables
the application of source voltage from the
measurement instrument.
DUT Connection: 2-Terminal (with triaxial cable)
Cable Length (approx.): 1 m (connector to connector)
Weight (approx.): 290 g
Description: The 16117C is designed to operate specifi-
cally with 4339B. It comes with a separate triaxial (spe-
cial screw-type) female connector and a high-voltage BNC
(special type) female connector, so that the terminal con-
figuration of the 4339A/B can be converted to any other
configuration. Therefore, custom-made test fixtures can
easily be constructed.
Applicable Instruments: 4339B, (4339A)*
* denotes the instrument is obsolete.
Frequency: DC
Maximum Voltage: 1000 V
Maximum Current: 10 mA
Resistance Measurement Range: 1 x 10
3 to 1 x 10 16 Ω
Operating Temperature: 0°C to 55°C
Furnished Accessories:
1. High-voltage BNC cable. This connector provides the
source voltage to the 16117C. This is a high-voltage
BNC connector and is not compatible with standard
BNC connectors.
2. Triaxial cable. The measured signal is carried on the
center conductor of this connector. This is a special
screw-type triaxial connector and is not compatible
with standard triaxial connectors.
3. Interlock cable. This connector enables the interlock
function which enables and disables the application of
source voltage from the 4339A/B when the interlock
line is connected and disconnected respectively.
4. High-voltage BNC (special type) female connector
5. Triaxial (special screw-type) female connector.
Adapter features
Description: The 16117E is designed to operate specifi-
cally with 4349A*/B. It is used to connect the 4349A*/B
and the DUT. Hence, four 16117E test leads are required
when using four channels of the 4349A/B. Its cable is
equipped with triaxial connectors on both ends. It is also
furnished with a triaxial female connector for connection
with the DUT and external voltage source.
Applicable Instruments: 4349A/B Only
Frequency: DC
Maximum Voltage: 250 V
Operating Temperature: 0°C to 45°C
Furnished Accessories:
Type Connector
Input Triaxial (special screw-type)
Output High Voltage BNC (special type)
Control Interlock connector*
Description P/N Qty.
Triaxial (special screw-type) female connector 1250-2228 1
High Voltage BNC (special type) female connector 1250-2317 1
Operation and Service Manual 16117-90031 1
Description P/N Qty.
Triaxial female connector 1250-1906 1