Up to 110 mhz (4-terminal pair), Lead components – Atec Agilent-16047A User Manual
Page 16
16047D Test Fixture
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 2-Terminal
Dimensions (approx.):
149 (W) x 40 (H) x 72 (D) [mm]
Weight (approx.): 230 g
Additional Error:
f: [MHz]
11
Up to 110 MHz (4-Terminal Pair)
Lead Components
Description: This test fixture is designed for impedance
evaluation of axial/radial lead type devices. The 16047D
can be used up to a higher frequency, 40 MHz.
Applicable Instruments: 4263B, 4268A, 4279A, 4284A,
4285A, 4288A, 4294A, (4192A, 4194A, 4263A, 4278A)*
* denotes the instrument is obsolete.
Frequency: DC to 40 MHz
Maximum Voltage: ±40 V peak max (AC+DC)
Operating Temperature: 0°C to 55°C
DUT Size: See the 16047A figure with module sizes.
Furnished Accessories:
Option:
16047A-701: Add Shorting Plate
P/N 5000-4226
Compensation and Measurement: Open and short
compensations are recommended before measurement.
Short compensation is performed by shorting the contacts
of the test fixture with a shorting plate. After performing
open and short compensations, the DUT is connected to
the test fixture.
Type of Error
Impedance
Proportional Error
±1.25 x (f/10)
2
Description
P/N
Qty.
Module For Axial Lead
16061-70022
2
Module For Radial Lead mounting
on fixture
16061-70021
2
Module For Short Radial Lead
16047-65001
2
Operating Note
16047-90300
1