Atec Agilent-16047A - Manual (Page 39)

42842A Bias Current Test Fixture
DUT Connection: 2-Terminal
Bias Voltage Output connector: BNC(f)
Dimensions (approx.):
216(W) x 173(H) x 235(D) [mm]
Weight (approx.): 2500 g
Basic Measurement Accuracy:
2%(< 1 kHz), 1% ( ≥ 1 kHz)
For detailed information, refer to the operation
manual of 42841A.
34
Up to 110 MHz (4-Terminal Pair) DC Bias Accessories
Description: This test fixture is designed for use with
the 42841A. It is connected directly to the bias current
output terminals of the 42841A. The following features
ensure accurate and safe DC bias measurements:
• Clear plastic cover is provided for safe measurements.
• Opening the cover decreases the voltage generated by
back-e.m.f. (electromotive force) to a level below 40 V
within 0.1 second.
• Heat-sensitive switch prevents DUT from overheating.
• Also equipped with DC bias voltage monitoring.
Applicable Instrument: 4284A (Option 4284A-002)
Frequency: 20 Hz to 1 MHz
Maximum DC Bias Current: 20 A
Operating Temperature: 5°C to 45°C
DUT Size: Smaller than 80(W) x 80(H) x 80(D) [mm]
Furnished Accessories:
Compensation and Measurement: Short compensa-
tions is recommended before measurement. Short com-
pensation is performed by shorting the measurement ter-
minals together with the furnished shorting plate. After
compensation, connect the DUT to the measurement ter-
minals and close the test fixture cover.
Description P/N Qty.
Shorting Plate 42842-00607 1
Operation and Service Manual 42842-90001 1