Atec Agilent-16047A - Manual (Page 36)

42941A Impedance Probe/Kit
Terminal Connector: 4-Terminal Pair, BNC
Cable Length (approx.): 1.5 m
Weight (approx.): 2400 g
Basic Measurement Accuracy: ±1%
For detailed information, refer to the operation
manual or the specifications of 4294A.
31
Up to 110 MHz (4-Terminal Pair) Probes
Description: This impedance probe kit is designed for
use with the 4294A. It provides the capability to perform
in-circuit measurements (printed circuit patterns, the
input/output impedance of circuits, etc.) with better accu-
racy and wider impedance coverage from 40 Hz to 110
MHz. DUTs can be connected by either using the stan-
dard probe, the alligator clip adapter or the BNC adapter.
The standard probe is best for in-circuit, board-mounted
components. The alligator clip is for components too large
for the standard probe tip. The BNC adapter is used to
connect circuits or networks equipped with BNC connec-
tors.
Applicable Instrument: 4294A only
Frequency: 40 Hz to 110 MHz
Maximum Voltage: ±42 V peak max (AC+DC)
Operating Temperature: -20°C to +75°C (probe only)
Furnished Accessories:
Compensation and Measurement: Adapter setup and
compensation is required before measurement. In the
Adapter setup menu, select PROBE 42941A. Use the fur-
nished 3.5 mm short and load standards. The open condi-
tion can be created by not connecting the probe to any-
thing. Perform phase compensation, short and load data
measurements. For compensation, open and short com-
pensation is recommended. Short compensation is per-
formed by shorting the probe. To short the probe it is rec-
ommended to use a shorting device with gold-plated sur-
facing (which provides stable contact resistance) as
described for 16095A.
4294A with 42941A
Description P/N Qty.
Pin Probe 42941-60002 1
Adapter BNC-SMB 1253-0476 1
Spare Pin Set (3 ea.) 42941-60002 1
3.5 mm SHORT NA 1
3.5 mm LOAD NA 1
Clip lead NA 1
Ground lead 04193-61629 1
CARRYING CASE 42941-60011 1
Operation and Service Manual 42941-90010 1
In-circuit measurement