Atec Agilent-16047A - Manual (Page 68)

63
Up to 3 GHz (7 mm) SMD
Shorting Device Size and Part Number (Furnished)
Shorting Device Size and Part Number (Option 16197A-001)
Options:
16197A-001: Add 0603 (mm)/0201 (inch) Device Guide
Set
The 16197A’s electrode spaces are 0.5 mm, 1 mm, 1.5 mm
and 2 mm and the device guide matches these spaces with
appropriate insertion holes for the applicable SMD. The
0.2 mm electrode spacing is available with option 001,
which includes a device guide with 0603 mm/0201inch
insertion holes, an electrode plate and 4 shorting devices.
Compensation and Measurement: First of all, select
the appropriate device insertion hole. If the device inser-
tion hole is not positioned in the pressure arm’s contact
range, reposition the device guide and the electrode plate.
Once this is prepared, perform compensation. Open and
short compensations are recommended in combination
with the electrical length compensation before measure-
ment. The fixture’s electrical length must be entered into
Size P/N Qty.
1 x 0.5 x 0.5 (mm) 16191-29005 1
1.6 x 0.8 x 0.8 (mm) 16191-29006 1
2.0 x 1.2 x 0.8 (mm) 16191-29007 1
3.2 x 1.6 x 0.8 (mm) 16191-29008 1
Size P/N Qty.
0.6 x 0.3 x 0.3 (mm) 16197-29001 4
Electrodes configuration and SMD size