Atec Agilent-16047A - Manual (Page 7)

3. The Benefits of Agilent Accessories
Each accessory is designed to ensure highly accurate measurements without degrading the performance
of the measurement instrument.
– Minimum residual error preserves the accuracy of the measurement instruments.
– Clearly defined error compensation allows easy calculation of error corrections.
– Strict measurement specifications, such as test frequencies and signal levels provide safe and accu-
rate measurements.
This document introduces a group of Agilent accessories that are well suited for the following measure-
ment instruments:
LCR Meters:
• 4263A*/4263B 100 Hz/120 Hz/1 kHz/10 kHz/100 kHz LCR Meter
• 4284A 20 Hz - 1 MHz Precision LCR Meter
• 4285A 75 kHz - 30 MHz Precision LCR Meter
• 4286A* 1 MHz - 1 GHz RF LCR Meter
• 4287A 1 MHz - 3 GHz RF LCR Meter
Capacitance Meters
• 4268A 120 Hz/1 kHz Capacitance Meter
• 4278A 1 kHz/1 MHz Capacitance Meter
• 4279A 1 MHz C-V Meter
• 4288A 1 kHz/1 MHz Capacitance Meter
Resistance Meters
• 4338A*/4338B 1 kHz Milliohm Meter
• 4339A*/4339B DC High Resistance Meter
• 4349A*/4349B DC 4-ch High Resistance Meter
Impedance Analyzers
• 4192A 5 Hz - 13 MHz LF Impedance Analyzer
• 4194A* 100 Hz - 40 MHz Impedance/Gain-Phase Analyzer
• 4291A*/4291B* 1 MHz - 1.8 GHz RF Impedance/Material Analyzer
• 4294A 40 Hz - 110 MHz Precision Impedance Analyzer
• E4991A 1 MHz - 3 GHz RF Impedance/Material Analyzer
Combination Analyzers
• 4195A* 100 kHz - 500 MHz Network/Spectrum Analyzer
• 4395A 10 Hz - 500 MHz Network/Spectrum/Impedance Analyzer
• 4396A*/4396B 100 kHz - 1.8 GHz RF Network/Spectrum/Impedance Analyzer
* denotes the instrument is obsolete
4. ISO 9000 Quality Management
ISO 9000 is a set of international standards for quality management and quality assurance. These stan-
dards were developed with the goal of documenting and implementing effective quality systems within
companies. ISO standards are consistent with Agilent’s quality system; in fact, the standards within
Agilent Technologies’ Quality Maturity System (QMS) exceed the intent of ISO 9000.
Introduction
2