Atec Agilent-16047A - Manual (Page 69)

64
the electrical length compensation function of the mea-
surement instrument first. Next, open compensation is
performed by not placing anything in the device insertion
hole. Short compensation is performed by placing the fur-
nished shorting device in the device insertion hole. After
performing open and short compensations in combination
with the electrical length compensation, the DUT is
inserted into the device insertion hole. Once the measure-
ment of the DUT is complete, remove the DUT from the
fixture. The following figures show how compensation and
measurement is performed.
Up to 3 GHz (7 mm) SMD
Compensation and measurement