Extron Electronics MGP Pro Series User Guide - Manual (Page 96)

MGP Pro Series • HTML Configuration and Control 90
Passwords Page
The Passwords page lets you assign an administrator or user password to control access
to the MGP Pro web pages. To access this page, click the
Configuration tab, then the
Passwords link on the left sidebar menu (see figure 33, 1 ).
NOTE:
• An administrator password must be in place before a user password can be
assigned.
• Passwords must contain 4 to 12 alphanumeric characters. Symbols and spaces are
not allowed, and the passwords are case sensitive.
1
Figure 33. Passwords Page
Assigning a password
To assign passwords:
1. Enter the new administrator password in the Administrator Password field.
2. In the Re-enter Admin Password field, enter the same password again to confirm it.
3. If you want to assign a user password, enter it in the User Password field.
NOTE: You cannot assign a user password unless an administrator password has
been assigned.
4. Reenter the same user password in the Re-enter the User Password field.
5. Click the Submit button to set the passwords.
Clearing a password
To remove an assigned password:
1. In the Administrator Password or User Password field, enter a single space.
2. Enter a single space in the Re-enter Admin Password or the Re-enter User
Password field.
3. Click the Submit button.