Extron Electronics MGP Pro Series User Guide - Manual (Page 79)

MGP Pro Series • Remote Configuration and Control 73
Command
ASCII (Telnet)
(Host to Processor)
URL Encoded (Web)
(Host to Processor)
Response
(Processor to Host)
Additional Description
E-mail Commands
Configure e-mail
events
24 X13@ , X13# , X13$ CR }
W X13@ , X13# , X13$ CR | Ipr X13@ , X13# , X13$ ]
When event X13@ occurs, end
e-mail notification X13$ to
recipient address X13# .
X13@ = e-mail event number
(1-64).
X13# = e-mail recipient
address.
X13$ = name of e-mail
notification file to be sent (first
file line is the subject and the
rest is the e-mail body).
Example: E 5, [email protected], 7.eml CR }
W5 %2C jdoe %40 extron %2E xom %2C 7 %2E eml CR |
lpr5, [email protected], 7.eml ]
For e-mail event 5,
send file 7.eml to
[email protected].
View e-mail events X13@ CR } W X13@ CR | X13# , X13$ ]
Send e-mail (file
named in mail box) E X13@ SM } W X13@ SM | Eml X13@ ]
Send e-mail (using
a different file)
E X13@ , X14# , X13$ SM }
W X13@ %2C X14# %2C X13$ SM }
Eml X13@ ] X14# = number inserted into
the e-mail message if the
.eml file has an embedded
E } command.
Web Browser Specific Commands
Read response from last URL command
E UB } W UB | {Response from command} ]
View the response to the last
command that was entered.
IP Setup Commands
Set unit name
24 E X10% CN } W X10% CN | Ipn • X10% ] Change the processor name
to
X10% , a name of your
choosing.
For
X10% : The name
can consist of up to 24
alphanumeric characters and
the minus sign or hyphen
(-). The first character must
be a letter, the last character
cannot be a minus sign.
Case does not matter.