Extron Electronics MGP Pro Series User Guide User Manual
Page 82
MGP Pro Series • Remote Configuration and Control
76
Command
ASCII (Telnet)
(Host to Processor)
URL Encoded (Web)
(Host to Processor)
Response
(Processor to Host)
Additional Description
IP Setup Commands (continued)
Set gateway
address
24
E
X10&
CG
}
W
X10&
CG
|
Ipg •
X10&
]
Set IP address
X10&
(nnn.nnn.nnn.nnn) for
your gateway. Leading zeros
are optional.
Read gateway
address
E
CG
}
W
CG
|
X10&
]
View the gateway IP address
for your unit.
Set administrator
password
E
X12#
CA
}
W
X12#
CA
|
Ipa •
X13)
]
Set administrator access
password
X12#
.
X12#
= 4 to 12 alphanumeric
characters. The password
is case sensitive. Special
characters (spaces or
symbols) are not allowed.
X13)
= displayed password.
With an RS-232 or RS-422
connection, the password is
displayed.
With an IP connection,
masked characters (four
asterisks) are displayed
(****).
Clear administrator
password
24
E
• CA
}
W %20 CA
|
Ipa •
]
Remove all passwords
(administrator and user).
NOTE: A user password cannot be assigned if an administrator password does not exist. Entering a password when the
MGP Pro has not been configured displays an E14 error response from the processor. If the administrator password is
cleared (removed), the user password is removed also.
View administrator
password
E
CA
}
W CA
|
X13)
]
View password
X13)
, shown
with leading zeros.
Set user
password
14 24
E
X12#
CU
}
W
X12#
CU
|
Ipu •
X13)
]
Set user password
X12#
(4-12 alphanumeric
characters). The password
is case sensitive. Special
characters (spaces or
symbols) are not allowed.
NOTE: A user password cannot be assigned if an administrator password does not exist.
Clear user
password
24
E
• CU
}
W %20 CU
|
Ipu •
]
Clear the user password only.
View user
password
E
CU
}
W
CU
|
X13)
]
View password
X13)
, shown
with leading zeros.
Query session
security level
E
CK
}
W CK
|
X13&
]
With tagged
response – verbose
modes 2 and 3:
Pvl
X13&
]
View security level
X13&
of the
current connection. For
X13&
:
0 = Anonymous
1-10 = Extended security
level
11 = User
12 = Administrator.