Extron Electronics MGP Pro Series User Guide User Manual
Page 62
MGP Pro Series • Remote Configuration and Control
56
Command
ASCII (Telnet)
(Host to Processor)
Response
(Processor to Host)
Additional Description
Vertical Size (Image)
Set a specific value
2 *
X@
*
X2#
;
X@
Ivs
X2#
]
Set the height of the image in
window
X@
to
X2#
.
X@
= 0-4. 0 = all windows.
For
X2#
:
Minimum = 1/16 the size of the
active input area.
Maximum = double the active
output area for 200% zoom.
Increase vertical size of image
2 *
X@
+ ;
X@
Ivs
X2#
]
Increase the height of the image
in window
X@
.
Decrease vertical size of
image
2 *
X@
– ;
X@
Ivs
X2#
]
Decrease the height of the
image in window
X@
.
View vertical size of image
2 *
X@
;
X2#
]
View the height of the image in
window
X@
.
Picture Control Copy
Copy picture controls
2
X!
*
X@
#
Pcc
X!
]
Copy the picture controls for
currently displayed input
X!
to
window
X@
.
X!
= 1-19.
Window Size and Position
Set window size and position
E
X@
,
X2!
*
X2!
*
X2@
*
X2@
X Y
}
Wxy
X@
,
X2!
*
X2!
*
X2@
*
X2@
]
NOTE: The variables must be entered in the following order: horizontal position (
X2!
),
vertical position (
X2!
), horizontal size (
X2@
), vertical size (
X2@
).
For window
X@
, set the position
(horizontal and vertical) to
X2!
and the size (width and height)
to
X2@
.
For
X2!
:
0 = 2048. Limits are ± the
output resolution.
For
X2@
:
Minimum = 1/16 the size of the
active output area.
Maximum = size of the active
output area.
View window size and position
E
X@
X Y
}
X@
,
X2!
*
X2!
*
X2@
*
X2@
]
View the position and size of
window
X@
.
Image Size and Position
Set image size and
position
E
X@
,
X2!
*
X2!
*
X2#
*
X2#
I Y
}
Ixy
X@
,
X2!
*
X2!
*
X2#
*
X2#
]
NOTE: The variables must be entered in the following order: horizontal position (
X2!
),
vertical position (
X2!
), horizontal size (
X2#
), vertical size (
X2#
).
For the image in window
X@
,
set the position (horizontal and
vertical) to
X2!
and the size
(width and height) to
X2#
.
X@
= 0-4. 0 = all windows.
For
X2!
: 0 = 2048. Limits are ±
the output resolution.
For
X2#
: Minimum = 1/16 the
size of the active input area.
Maximum = double the active
output area for 200% zoom.
View image size and position
E
X@
I Y
}
X@
,
X2!
*
X2!
*
X2#
*
X2#
]
View the position and size of
the image in window
X@
.