Extron Electronics MGP Pro Series User Guide - Manual (Page 60)

MGP Pro Series • Remote Configuration and Control 54
Command
ASCII (Telnet)
(Host to Processor) Response
(Processor to Host)
Additional Description
Detail Filter
Set a specific value
X@ * X1! D X@ Det X1! ] Set the detail (sharpness) level
for window
X@ to X1! .
X@ = 0-4. 0 = all windows.
X1! = 0-127.
Increment detail level X@ + D X@ Det X1! ] Select the next higher
sharpness level.
Decrement detail level X@ – D X@ Det X1! ] Select the next lower sharpness
level.
View detail value X@ D X1! ] View the current sharpness
level setting.
Horizontal Shift (Window)
NOTE: For the shift values shown for the next two commands, the zero location is 2048. When you enter a shift value via
the front panel, the LCD screen shows only the amount of lines or pixels the window has shifted. The SIS response is offset
by 2048.
Example: The LCD window displays
+50, but the response to the SIS command is 2098.
Set a specific value 1 * X@ * X2! H X@ Whp X2! ] Set the horizontal centering of
window
X@ to X2! . For X2! :
0 = 2048. Limits are ± the
output resolution.
Increment horizontal image
shift 1 * X@ + H X@ Whp X2! ] Shift window X@ right.
Decrement horizontal window
shift 1 * X@ – H X@ Whp X2! ] Shift window X@ left.
View horizontal window shift
amount 1 * X@ H X2! ] View the amount of horizontal
window shift.
Vertical Shift (Window)
Set a specific value
1 * X@ * X2! / X@ Wvp X2! ] Set the vertical centering of
window
X@ to X2! .
Increment vertical window
shift 1 * X@ + / X@ Wvp X2! ] Shift window X@ up.
Decrement vertical window
shift 1 * X@ – / X@ Wvp X2! ] Shift window X@ down.
View vertical window shift
amount 1 * X@ / X2! ] View the amount of vertical
shift.
Horizontal Shift (Image)
Set a specific value
2 * X@ * X2! H X@ Ihp X2! ] Set the horizontal centering of
the image in window
X@ to X2! .
Increment horizontal image
shift 2 * X@ + H X@ Ihp X2! ] Shift the image in window X@
right.
Decrement horizontal image
shift 2 * X@ – H X@ Ihp X2! ] Shift the image in window X@
left.
View horizontal image shift
amount 2 * X@ H X2! ] View the current setting for
horizontal centering of the
image in window
X@ .