Extron Electronics MGP Pro Series User Guide - Manual (Page 43)

MGP Pro Series • Operation 37
3. Rotate either Adjust knob to select one of the 128 available window preset locations in
which to save the settings.
4. Press the Enter button to save the current window setting in the preset location that you
selected. The LCD screen shows a message indicating that the preset is being saved to
the selected memory location, followed by a message that the preset has been saved.
The following examples show a preset saved to memory location 1:
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
If you want to exit this menu without saving any changes, repeatedly press the Preset
Recall/Save button until the following message appears on the LCD screen, then press
the Enter button to exit the Window Presets dialog.
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
Recalling a window preset
To recall a window preset using the front panel buttons:
1. Press and release the Preset Recall/Save button. The following message appears on
the LCD screen:
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
2. If you want to recall the preset without the input whose number was displayed when
the preset was saved ( Recall #xxx woINP ), proceed to step 3.
If you want to recall the preset with the input ( Recall #xxx wINP ), press the Preset
Recall/Save button again. The following message appears:
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
If you select this option, the inputs change to display the sources that were displayed at
the time the preset was saved.
3. Use either Adjust knob to select a window preset number to recall. Press the Enter
button to recall the preset you selected. The LCD screen shows a message indicating
that the preset was recalled (in the example below, preset 1 was recalled).
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
If you want to exit this menu without recalling a preset, repeatedly press the Preset
Recall/Save button until you see the
Window Preset [Enter] to Exit message. Press
the Enter button to exit the Window Presets dialog.