Extron Electronics MGP Pro Series User Guide User Manual
Page 67
MGP Pro Series • Remote Configuration and Control
61
Command
ASCII (Telnet)
(Host to Processor)
Response
(Processor to Host)
Additional Description
Test Pattern
Set test pattern
X%
J
Tst
X%
]
Select test pattern
X%
. For
X%
:
0 = Off (none)
1 = Colorbars
2 = X-Hatch (16 x 12)
3 = 4 x 4 X-Hatch
4 = Grayscale
5 = Ramp
6 = Alt. Pixels
7 = White Field
8 = Crop
9 = Side-By-Side (4 x 3 crop)
10 = Quad Split (4 x 4)
11 = PIP Images (4 x 3 or 6 x 9
PIP columns)
12 = 1.78 Aspect (4 x 3/16 x 9)
13 = 1.85 Aspect (4 x 3/16 x 9)
14 = 2.35 Aspect (4 x 3/16 x 9).
NOTE: Test patterns 10 and
11 are not available on the
MGP 462 Pro models.
View test pattern
J
X%
]
View the currently selected test
pattern.
Executive Mode
NOTE: In all front panel lock modes, RS-232, RS-422, and Ethernet controls are not affected.
Disable executive mode
0 X
Exe 0
]
Unlock all front panel controls.
Enable executive mode
1 X
Exe 1
]
Lock front panel controls except
for the input buttons.
Enable executive mode 2
2 X
Exe 2
]
Lock all front panel controls.
View executive mode status
X
X3%
]
View executive mode status
X3%
. For
X3%
:
0 = Unlocked.
1 = Locked except for input
selection buttons.
2 = All controls are locked.
Special Functions
Output polarity
Example:
1 *
X3^
#
1 * 2 #
Pol
X3^
]
Pol 2
]
Set output polarity to
X3^
.
For
X3^
:
0 = H-/V- (default)
1 = H-/V+
2 = H+/V-
3 = H+/V+.
Output sync polarity is H+/V-.
View output polarity
1 #
X3^
]
View the current output polarity
setting
X3^
.