Extron Electronics MGP Pro Series User Guide - Manual (Page 95)

MGP Pro Series • HTML Configuration and Control 89
Date/Time settings fields
The Date/Time Settings section provides a location for viewing and setting the time
functions.
Figure 32. Date/Time Settings Section
To change the date and time settings:
1. Click the drop box for the desired variable. The adjustable variables are month, day,
year, hours, minutes, am or pm, and (time) zone. A drop-down scroll box appears (the
Month drop box is selected in figure 32).
2. Click and drag the slider or click the Scroll Up button or Scroll Down button
until the desired variable is visible.
3. Click on the desired variable.
NOTES: If setting the time, set the local time. The Zone variable allows you to then
enter the offset from Greenwich Mean Time (GMT).
The
Zone field identifies the standard time zone that has been selected and
displays the amount of time, in hours and minutes, that the local time varies from
the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate Daylight Saving radio button. To turn off daylight saving time,
select Off .
NOTE: When daylight saving time is enabled, the MGP Pro updates its internal
clock between Standard Time and Daylight Saving Time in the spring and fall on
the date that the time change occurs in the United States of America and parts
of Europe and Brazil. When daylight saving time is turned off, the processor
does not adjust its time reference.
6. Click the Submit button at the bottom of the Date/Time Settings section to implement
your selections.