Extron Electronics MGP Pro Series User Guide - Manual (Page 58)

MGP Pro Series • Remote Configuration and Control 52
Command
ASCII (Telnet)
(Host to Processor) Response
(Processor to Host)
Additional Description
Window Blanking (Muting)
Mute window X@ * 1B X@ Blk1 ] Blank (mute) window X@ using
the currently selected transition
effect.
X@ = 0-4. 0 = all windows.
Unmute window X@ * 0B X@ Blk0 ] Display (unmute) window X@
using the currently selected
transition effect.
View blanking status X@ B X$ ] View blanking status for window
X@ . For X$ :
0 = unmuted, 1 = muted.
Window Priority
Set priority
X@ * X@ * X@ * X@ ~ Pri X@ X@ X@ X@ ] Set the priority of the windows
to the order entered.
View priority ~ X@ X@ X@ X@ ] Display the priorities of the
windows.
Window Transition Effect
Select effect
4 * X1@ # Eff X1@ ] Select transition effect X1@ .to be
used when windows are muted
or unmuted. For
X1@ :
1 = Cut (default)
2 = Dissolve
3 = Soft wipe up
4 = Soft wipe down
5 = Soft wipe right
6 = Soft wipe left
7 = Soft wipe center in
8 = Soft wipe center out
9 = Soft wipe square in
10 = Soft wipe sq. out
11 = Soft wipe curtain in
12 = Soft wipe curtain out
13 = Hard wipe up
14 = Hard wipe down
15 = Hard wipe right
16 = Hard wipe left
17 = Hard wipe center in
18 = Hard wipe center out
19 = Hard wipe square in
20 = Hard wipe square out
21 = Hard wipe curtain in
22 = Hard wipe curtain out
View effect 4 # X1@ ] View the currently selected
window transition effect.
Window Effect Duration
Select duration
5 * X1( # Dur X1( ] Set the speed of the window
effect to
X1( .
X1( = 0-5 seconds in
0.1-second increments
View duration 5 # X1( ] View the effect duration time.