Extron Electronics MGP Pro Series User Guide - Manual (Page 70)

MGP Pro Series • Remote Configuration and Control 64
Command
ASCII (Telnet)
(Host to Processor) Response
(Processor to Host)
Additional Description
Special Functions (continued)
Set screen background color
8 * X4# # Bkg X4# ] Set background color X4# for
the output screen. For X4# :
0 = Off (default)
1 = Red
2 = Green
3 = Blue
4 = White
5 = Magenta
6 = Cyan
7 = Yellow
8 = Background image
9 = Live background input
10 = Custom color.
View background color 8 # X4# ] View the current background
color setting (
X4# ).
Set a custom color 22 * X2% * X2% * X2% # Ubk X2% * X2% * X2% ] Set custom color values ( X2% )
for the screen background,
setting red, green, and blue in
that order.
X2% = 0-255.
View custom color 22# Ubk X2% * X2% * X2% ] View the red, green, and blue
values of the custom screen
background color.
Background Image
Save image
E 0 , filename MF } Ims filename ] Save the current output
image to memory under the
designated name.
NOTE: The filename must be no more than 16 characters, including the .bmp extension.
Recall image E 0 , filename RF } Imr filename ] Recall the image with the
specified file name and display
it as a background.
Current image E RF } filename ] View the file name of the
currently displayed background
image.
Film Mode
Enable film mode
18 * X! * 1 # X! Flm 1 ] Enable film mode for input
X! . (Auto-sense 3:2 or 2:2
pull-down.)
X! = 1-19.
Disable film mode 18 * X! * 0 # X! Flm 0 ] Disable film mode for input X! .
(Blocks the deinterlacer from
using either pull-down method.)
View film mode status 18 * X! # X$ ] View the current film mode
setting for input
X! .
For X$ :
0 = film mode disabled
1 = Film mode enabled
Auto Image
Run Auto image
55 * X@ # Aut X@ ] Perform Auto Image on window
X@ . X@ is:
1-4 for MGP 464 Pro models
1 or 2 for MGP 462 Pro
models.