Hdcp input, Authorization – Extron Electronics MGP Pro Series User Guide User Manual
Page 71
MGP Pro Series • Remote Configuration and Control
65
Command
ASCII (Telnet)
(Host to Processor)
Response
(Processor to Host)
Additional Description
HDCP/Signal Status
NOTE: These commands are applied only to digital inputs.
Query input
E
I
X!
HDCP
}
X2(
]
With tagged response
(verbose mode 2 or 3):
Hdcp I
X!
*
X2(
]
View HDCP status
X2(
for input
X!
(HDMI inputs only). For
X2(
:
0 = No source or sink detected.
1 = Source or sink with HDCP
detected.
2 = No source or sink detected
with HDCP.
Query all inputs
E
I HDCP
}
X2(
X2(
...
X2(
]
With tagged response (verbose mode 2 or 3):
Hdcp I00 *
X2(
...
X2(
]
View the HDCP status of all
inputs. Inputs are displayed in
numerical order with the live
background input last.
Query output
E
O
X!
HDCP
}
X2(
]
With tagged response
(verbose mode 2 or 3):
Hdcp O 1 *
X2(
]
View HDCP status
X2(
of the
output.
HDMI Output Format
Set format
E
X3!
VTPO
}
Vtpo
X3!
]
Set the output color space and
format to
X3!
. For
X3!
:
0 = Auto (based on sink EDID)
1 = DVI 444 RGB (0-255, no
InfoFrames).
2 = HDMI 444 RGB (0-255,
InfoFrames).
Default is 0.
View format setting
E
VTPO
}
X3!
]
View the current output
colorspace for the HDMI
output.
HDCP Input Authorization (HDMI inputs only)
Set HDCP authorized device
On
E
E
X!
* 1 HDCP
}
Hdcp E
X!
* 1
]
Select HDCP authorization for
input
X!
.
Set HDCP authorized device
Off
E
E
X!
* 0 HDCP
}
Hdcp E
X!
* 0
]
Deselect HDCP authorization
for input
X!
.
View HDCP authorization
status
E
E
X!
HDCP
}
X3$
]
With tagged response
(verbose mode 2 or 3):
Hdcp E
X!
*
X3$
]
View HDCP authorization status
X3$
for input
X!
. For
X3$
:
0 = HDCP encrypted data
blocked.
1 = HDCP encrypted data
allowed (default).