Extron Electronics IN1608 MA User Guide User Manual
Page 94
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
88
To configure the groups:
1.
Click the
Mix Controls
tab.
2.
In the Group Controls panel, click the
Configure Groups
button. The Configure
Groups dialog box opens.
3.
For the desired group master, click the corresponding drop-down menu to display a list
of available group members.
When changes are made to the associated control in the software, only the selected
group members are affected (see the
on page 87 for a summary of the group
masters).
To assign a volume control to the front panel volume knob:
1.
Click the
Mix Controls
tab.
2.
In the Group Controls panel, click the
Configure Groups
button. The Configure
Groups dialog box opens.
3.
From the Front Panel Volume Knob list, select the desired volume control the front panel
volume knob adjusts. The available options are:
•
Program Volume (Group #1)
— Adjusts the program audio (default).
•
Mic Volume (Group #3)
— Adjusts microphone volume.
•
Output Volume (Group #8)
— Adjusts the output volume.
Group members
Group members are individual controls that comprise the group master. They can be
controlled individually, allowing for relative levels between members to be adjusted.
NOTE: Individual members of a mute group master that have been muted outside of the
group master will remain muted regardless of the current group master state.
Group controls
When grouped, gain control members move together at relative levels. If one member
reaches its limit, it retains that position while the other members continue to travel. When the
grouped members travel in the reverse direction, the member that was at its limit reverts to
its position relative to the other members.
When grouped, mute control members update to indicate they are part of a group. Group
members can be individually muted as well. When grouped members are individually muted,
they are exempt from the setting of the group master.