Extron Electronics IN1608 MA User Guide - Manual (Page 64)

IN1606 and IN1608 Series Scaling Presentation Switcher • Configuration Software 58
Tools Menu
The Tools menu contains options backing up and restoring program settings, updating
firmware, viewing and saving communication data, and resetting confirmation dialog boxes.
To access this menu, click the
Tools menu.
Figure 28. Tools Menu (IN1608)
Backup and Restore
This option saves current configurations and restores saved configurations.
From the
Tools menu, click Backup and Restore . The System Backup and Restore
window opens.
Figure 29. Backup and Restore Window
To save the current configuration settings to an external file:
1. In the Backup panel, click the Browse button. The Save As window opens.
2. Navigate to the desired save location on the host device and click the Save button. The
window closes.
3. Click the Backup button to save the configuration to an external file to the host device.
4. Click the Close button to close the System Backup and Restore window.
To restore a saved configuration settings file:
1. In the Restore panel, click the Browse button. The Open window opens.
2. Navigate to the save location of the saved file and click the Open button. The Open
window closes.
NOTE: Valid configuration files have a .extz file extension.
3. If desired, select the Include Communication Settings check box to also include
communication settings to the restored configuration.
4. Click the Restore button to apply the saved configuration settings.
5. Click the Close button to close the System Backup and Restore window.