Extron Electronics IN1608 MA User Guide - Manual (Page 56)

IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 50
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Device Commands
On-screen input “bug” time-out
NOTE: The OSD bug is a floating message displayed after selecting a new input.
Set OSD bug time-out EX2#
MDUR
}
Mdur
X2#] Set the duration the OSD bug
displays to
X2# seconds
( 003 = default).
View time-out E
MDUR
} X2#] View the OSD duration.
NOTE: Setting the time-out to 501 permanently displays the OSD bug (never times out). Setting the time-out to
0 disables the OSD bug.
Reset
Erase user-supplied
Web pages and files
24 28
E
filenameEF
}
Del • filename
] Delete imported Web pages and
files.
Erase current directory
and files
24 28
E /EF } Ddl ] Delete the current directory and
files.
Erase current directory
and subdirectories
24 28
E
//EF
}
Ddl
] Delete the current directory and
subdirectories.
Erase flash memory 24 E
ZFFF
}
Zpf
] Clear the flash memory.
Reset all device settings
to factory default
24
E ZXXX } Zpx ] Reset all device settings to
factory default.
Absolute system
reset
24 (includes
setting DHCP: off; IP
192.168.254.254)
E ZQQQ } Zpq ] Reset all device settings,
including DHCP and IP settings.
Absolute system reset 24
(retain IP)
E ZY } Zpy ] Reset all device settings,
excluding IP settings.
NOTE: The reset E
ZY command is similar to ZQQQ , but excludes IP settings such as IP address, subnet
mask, gateway IP address, unit name, DHCP setting, and port mapping (telnet, Web, or direct access) in
order to maintain communications with the device. This reset is recommended after a firmware update.
NOTES:
X2# = On-screen display bug time-out 0 = OSD bug is never displayed
1-500 (in 1 second increments)
3 = default
501 = OSD bug never times out