Extron Electronics IN1608 MA User Guide - Manual (Page 35)

IN1606 and IN1608 Series Scaling Presentation Switcher • Operation 29
Device Info Submenu
Figure 22. Device Info Submenu (IN1608)
The Device Info submenu displays device information including unit name, firmware version,
internal temperature, input and output signal information, and detected display information.
This submenu does not contain any adjustable submenu items.
Front Panel Lockout (Executive Modes)
The scalers have three modes of front panel security lock that limit the operation of the
device from the front panel.
Executive mode 0 (disabled) — Unlocks front panel functions. This is the default setting.
Executive mode 1 (enabled) — Locks all front panel functions completely. This mode can
be enabled or disabled only by SIS commands (see the
executive mode commands on
page 48). All functions can still be performed through USB, RS-232, or Ethernet control (see
SIS Configuration and Control on page 31, Configuration Software on page 54, or
Internal Web Pages on page 60).
Executive mode 2 (enabled) — Locks all front panel functions except input switching
and volume control. All functions and adjustments can still be made through USB, RS-232,
or Ethernet control (see
SIS Configuration and Control on page 31, Configuration
Software on page 54, or Internal Web Pages on page 60).
To enable executive mode 2, press and hold the Menu and Enter buttons simultaneously for
3 seconds.
The menu system returns to the default menu within 10 seconds.